• -10%
HARALD TIER 1
HARALD TIER 1
HARALD TIER 1
HARALD TIER 1
HARALD TIER 1
HARALD TIER 1
HARALD TIER 1

HARALD TIER 1

Coyote / Multicam

XGHT1
Valhalla System / Tier

Intensively tested in conflict zones such as Ukraine and in multiple direct action environments, this design prioritizes offering the operator maximum mobility, configuration capacity, and versatility, without sacrificing essential ballistic protection.

The TIER 1 is composed of the following elements:

    • HARALD PLATE CARRIER, the front and rear panels of the plate carrier, including the connecting straps between them.

    • SIGURD CUMMERBAND, which provides the lateral closure of the plate carrier.

    • FLOKI BOX POUCH, central box for various configurations

    • FREY M4/AK TRIPLE POUCH, triple magazine pouch

. . .
VERY IMPORTANT!
Check our size guide before ordering. Especially for pants, measure your waist circumference.
242.06€ 268.95€ -10%
Tax included
Time left

The HARALD plate carrier design follows principles of sports biomechanics, naturally adapting to the operator’s movements. Its minimized structure ensures protection of vital organs while improving lateral and abdominal mobility by better fitting the anatomy of the torso.

FREY M4/AK TRIPLE POUCH

Adaptive sizing thanks to side elastic bands allows use with magazines of different widths and facilitates reinsertion even under stress.

They are versatile, functioning as Velcro inserts (inside a box like FLOKI) or as external pouches via their MOLLE/Velcro system, adapting to different setups.

FLOKI BOX POUCH

The Floki Box Pouch is a modular and versatile pouch that allows for multiple internal configurations thanks to its Velcro-lined main compartment, compatible with Frey inserts or pouches. Its structure is made of 1000D nylon, with a MultiCam® mesh base for drainage and a front panel with laser-cut MOLLE and female Velcro. It also incorporates ITW Nexus® clips for quick attachment to a plate carrier.

ITW Nexus® GTSR Split-Bar Clips

Clips with Ghillitex™ technology, compatible with 25 mm MOLLE/PALS. Made of Acetal, they support heavy loads and allow quick installation without sewing thanks to the Split-Bar system, improving modularity and personalized fit.

SIGURD CUMMERBUNDS

The cummerbunds are designed to maximize the operator’s mobility, configuration, and versatility without sacrificing load capacity. Made with MultiCam® mesh for drainage and lightness, high-performance elastic fabric for body fit, and 1000D nylon for durability, they offer a low-profile ergonomic structure. Each piece includes three elastic pouches for ammunition or other essential items, D-ring style handles for easy adjustment, and Velcro closure compatible with multiple plate carriers on the market. Installation is quick and adaptable to different body types.

Low Profile

Minimalist cut and design to conform as ergonomically as possible to the body’s shape and offer a wider range of lateral mobility.

MultiCam® Mesh

A mesh fabric that provides special properties in a wide range of operational scenarios, most notably the ability to instantly drain water during maritime operations. However, the main functionality of this material (developed by Crye Precision®) is to reduce the weight of the plate carrier and enhance heat dissipation in hot environments.

Size

Minimalist cut and design of the plate carrier, which tightly fits the ballistic plate’s ergonomics thanks to side elastic fabric bands that prevent it from shifting while running or performing sudden movements.

HARALD's design ensures that the plate carrier follows the operator’s movements based on the basic principles of sports biomechanics, where the gear should adapt (as much as possible) and accompany the human body’s movements in the most natural way.

Reducing the plate carrier to its minimum expression, while still offering the operator vital organ protection, allows for greater lateral and abdominal mobility as it better fits the upper torso’s anatomy.

Características

  • MultiCam® mesh for immediate drainage during maritime operations. Also reduces the weight of the gear and increases body heat dissipation.

  • ITW Nexus® GTSR Split-Bar Body clips with Ghillitex™ technology designed for quick mounting on 1–25 mm MOLLE/PALS systems. Made of Acetal, they support heavy loads. The Split-Bar system allows fast, sew-free clip placement and removal, improving modularity and personalized fit across MOLLE system points.

  • GhillieTEX™ is a technology that reduces IR signature on MILSPEC products that are 100% U.S. Berry Amendment Compliant.

  • FLOKI BOX: Interior lined with female Velcro to host Frey inserts or other Velcro-based accessories.

  • FREY M4/AK TRIPLE POUCH: For 3 magazines of 5.56 x 45 (M4 type), 3 magazines of 7.62 x 39 (AK type)

  • 1000D nylon fabric for resistance to wear in harsh environments.

  • Communication elastics, designed to hold PTTs and reduce the bulk of push-to-talk buttons by eliminating the need for other systems like clips. Also useful for holding hydration tubes, antennas, and communication cables.

  • Upper internal document pocket.

  • Original YKK zipper.

  • Paracord zipper pull with heat-sealed finish for quieter operation

  • Compatible with SAPI-style plates (maximum 31 cm x 3.8 cm x 26 cm)

  • Minimalist design offering protection to essential vital zones

  • Velcro straps on the shoulders for height adjustment

  • Laser-cut MOLLE Velcro

  • Compatible with traditional MOLLE pouches/Velcro panels

  • Hidden clips under MOLLE straps to prevent accidental openings

  • Side elastic fabric bands for a better fit to different plates

  • Pull tab for faster access to the plate compartment

  • Each cummerbund piece has three elastic pouches for carrying items such as magazines (mainly for M4-type magazines) or small items like grenades, tourniquets, etc.

  • One size fits all, each cummerbund piece is 58 cm long

Product added to wishlist