Your cart
There are no more items in your cart
RAGNARÖK OD
Combat Uniform
Scout
Ragnarök is born from the words ragna 'gods' and rök which mean 'destiny', that is, the "destiny of the gods" also known as the battle of the end of the world. There is no better name for pants designed for the battlefield.
What is special about the Ragnarök uniform?
Our uniforms have been based on the experience of people who are currently deployed and active in conflict zones. Where resistant garments are a key requirement, while being comfortable to wear for long periods of time or during long journeys. Their advice and, why not say it, the use of certain elements very present in sports mountain clothing has led us to create the Ragnarök combat uniform.
Tested in the Dead Sea
Our RAGNARÖK uniforms have been tested, among others, by first-level members of special operations from the State of Israel. These specially trained units are very demanding about the quality of the material and prior to its use they subject it to tough tests of resistance and durability. Our uniforms passed the demanding test of the Dead Sea (lake with hypersaline waters). This test or almost textile torture consisted of: Submerging with the uniform in the especially salty water of the Dead Sea, letting the uniforms dry in the sun with the saltpeter and running races several times to check the anti-tearing capacity of the fabric and the seams.
As if this test were not enough punishment, the same uniforms were subjected a second time to the same test of being submerged into the salt water, waiting for them to dry and performing certain exercises and races again, pushing the fabric to its limits. Our Ragnarök uniforms passed the test, the seams were not torn and the fabric survived, keeping the uniform fully operational.
We could explain a thousand features of our Ragnarök uniforms, but we believe passing this test attests to the quality of the product, designed by professionals and tested by professionals.
General characteristics Combat Pant:
- Adjustable size through elastic straps on both sides of the waist.
- Velcro closure.
- Internal waistband in velvety material to improve comfort and reduce internal slippage of the combat shirt.
- 60mm belt loops for use with tactical belts.
- Original YKK zippers.
- Reinforcements on both front anti-tear pockets.
- Large cargo capacity with 11 pockets, designed to be accessed even with an equipped plate carrier.
- Resistant fabric, which limits tears and wear.
- Double stitching on the crotch.
- Breathable fabric, which allows sweat to dry quickly, favoring the evacuation of body heat.
- Flexible material with elastane that allows the stretching of the fabric in the lower back area, preventing the pants from moving from their correct position when bending over.
- Elastic material with elastane in the knee area to improve the dynamics of the knee movement.
- Front reinforcements on the knees.
- Velcro access for installation of internal protection knee pads.
- Adjustments at the back of the knee for the width of the pants.
- Original velcro adjustments for the closure at the bottom.
- Metal hook on the inside of the bottom of each leg for a perfect fit of the pants and to be able to join them to the footwear.
11 pocket configuration:
- Two very deep front pockets with angles to facilitate access even with the equipment on, both with reinforced trim to avoid tearing or as a holding area for knives or other clip-on tools.
- One small front pocket on the left side
- Four side pockets designed so that the load moves towards the back of the thigh, allowing greater maneuverability to the knee when walking, running or performing any movement. It is a cargo design that favors mobility and keeps objects carried in the pockets away from sensitive areas such as the knees.
- Side cargo pockets: Both have an original YKK zip closure, the pocket itself has a gusset to expand its carrying capacity or maintain its original low-profile position.
- Pocket designed for use with mobile phones in a quick access area and with a velcro flap closure, even in extreme cases it allows carrying a 5.56 mm magazine.
- Two low profile, shapeless and rounded pockets on the back to allow access even with the gear on.
- Two small pockets on the top of both back pockets.
General characteristics Combat Shirt:
The design of the Ragnarök combat shirt combines CORDURA's BRAND BASELAYER technology with a high-resistance mesh design applied in areas where the skin has the highest sweat points and needs a quick evacuation point to keep the body dry. The back, chest and armpits cuts have been specially designed so that the operator can also wear ballistic protection vests. Reinforcing the areas where the operator comes most into contact with the environment, such as the arms with reinforcement seams on the elbows, as well as the shoulders that must support the straps of the vests or backpacks, leaving the entire trunk area with breathable, ultra-fast drying materials.
CORDURA® BRAND BASELAYER
It is a high-performance knit fabric specifically designed from a blend of nylon and cotton. Versatile in all weather conditions. Stronger than 100% cotton. And unlike polyester, it does not adhere to the skin or generate beads of sweat when exposed to high temperatures during combat.
NO MELT / NO DRIP
- Does not drip like polyester.
- Reduces the severity of burns.
- Helps protect against flash fires.
HUMIDITY CONTROL
- Absorbs moisture faster than 100% cotton.
- Quickly removes moisture from sweat.
- Absorbs moisture faster than 100% cotton.
DURABILITY
- Higher strength-to-weight ratio than cotton.
- Exceptional resistance to abrasion.
- Great resistance, which prevent holes and tears due to tearing.
EXTREME COMFORT
- Feels soft against the skin.
- Air permeability equivalent to cotton.
- Perfect for everyday use on the base or in combat.
Removable hood
Based on mountain concepts, the Ragnarök hood allows very quick installation and removal by means of velcro on the inside of the neck of the combat shirt.
Likewise, its large dimensions are designed to be used with a ballistic helmet on. You can adapt the shape of the hood on its visor as it has an internal wire to modify the front shape, as well as adjusting the height and upper perimeter of the hood with handles to make a more customized adjustment to your operational needs.
R.T.F. (Reinforced Technical Fabric): This technology is based on fabrics that are made using a special reinforcement technique that makes them resistant to tearing and fraying. This process applied to the fabric reinforces the fabric with a stripe pattern structure at regular intervals. R.T.F. This technology prevents the tear from expanding beyond the first square of the damaged fabric in the fabric itself. Fabrics made with this technology have an excellent strength-to-weight ratio, making tactical gear strong and lightweight.
EDS (Ergonomic Design System): Design of garments that adapt to the anatomy, working as a second skin. Latest textile technology from Ragnar Raids, where physical activity is a priority for the design and manufacture of improved goods.
Xtretch Dynamic: It refers to the combination of elastic fabrics that stretch in two or four directions, using elastic fibers. Its structure aims to adapt to demanding physical performance in long days of activity.
YKK: Its zippers are well-known around the world for its impeccable production standards and exhaustive quality control processes among many other products.
CORDURA® BRAND BASELAYER: It is a high-performance knit fabric specifically designed from a blend of nylon and cotton. Versatile in all weather conditions. Stronger than 100% cotton. And unlike polyester, it does not adhere to the skin or generate beads of sweat when exposed to high temperatures during combat.
Combat Shirt Details
• Outer 1: 60% Polyester, 40% Cotton
• Outer 2: 50% Cotton, 50% Nylon
• Outer 3: 100% Polyester
Combat Pants Details
• Outer 1: 60% Polyester, 40% Cotton
• Outer 2: 90% Nylon, 10% Elastane
• Outer 3: 100% Nylon
• Lining: 100% Polyester
Care
• Do not bleach
• Do not use fabric softener
• Wash separately or with similar colors
• Dry avoiding direct sunlight
• Do not iron the protective parts
• Do not iron the elastic parts
Tap to zoom
